Stray Bullet
Named after a Song by KMFDM this scooter has been massively modified The primary objective was to keep the classic look and achieve some daily driver reliability. The forward frame has been reinforced by inserting the tube of a PX into the forward post of the frame enlarging the rake by 1.5 degrees. The original engine has been abandoned and was replaced by a PX engine equipped with a 60mm stroke crankshaft, a Quattrini barrel and a V-Force reed valve inlet. To fit the engine into the wideframe some bushes and reinforcement brackets were welded in. All this is ventilated by a 28mm PWK carb Although 22HP/ 22Nm at the rear wheel are more on the mild side it is more than enough to make Stray Bullet a beefy street racer. The forward wire wheel and the disc brake are self-developed. An M/Unit by Motogadget takes all the electrical work and a Motogadget Tiny comes in a classic look hiding well that it is digital. The paint job was done by me, Pinstriping and lettering by T.Plate
